Manitowoc Ice D-570 Ice Storage Bin, 532 lb. Capacity 30''W

Ensure You Have Plenty of Fresh Ice at Even the Busiest Times

Central Model#: 240-086 Brand: Manitowoc Series: Indigo NXT Mfg Part#: D-570
Your Cost:
$1,247.00 /Each


No shipping details available for this configuration

Product Details

This Manitowoc D-570 is an ice machine storage bin perfect for the Manitowoc Indigo NXT cube ice machines as well as flaker and nugget machines. This ice bin has a smudge-resistant Duratech metal finish, which is easy to keep clean. The new polyurethane Artic Blue bin liner accentuates the look of the ice inside the bin. The D570 ice storage bin includes an ergonomic NSF approved ice scoop with built-in knuckle and thumb guard. The scoop has a 5.3 lb. capacity per scoop. Built-in scoop holder keeps the ice scoop handle above the ice. The door on this bin is angled 53 degrees to allow for easier access to ice, especially when scooping from the bottom. The door stays in the open position with the help of a unique cammed bin door self-latch. No worrying about getting fingers caught in a slamming door! This D570 bin has a 543 lbs. storage capacity. NSF listed.


This Product Ranks 1 Out Of 30 In Ice Storage Bins.

Indigo Ice Machine Series: iT420 and iT620 (Each requires K00472 bin adapter), iF0300, iT0300, iT450, iT0500, iT0500N, iF0600N, iF0600C, iF0750, iF0900N, iT0900, iF0900C, iT1200, iT1200C (no bin adapter required); Flaker and Nugget Ice Machines: RFF320, RNF620, RFF0620 (Each requires K00472 bin adapter), RNF1100, RFF1300, and RNF2000C (no bin adapter required)
Central Model#: 240-086
Width: 30"
Depth: 34"
Height: 50"
Bin Storage: 532 lbs.
Casters / Legs: 6" Legs
Cu. Ft.: 29.7
Size: 30"W
Type: Ice Storage Bin
Catalog Page: View on Catalog Page 32
Certifications: NSF, AHRI, ARI
  • What is an ice machine deflector, and when would one be needed?

    • An ice machine deflector is used to deflect the ice away from the front panel into the back of the ice bin so ice doesnt build up and cause condensation issues on the front panel of the machine. A deflector would be used on cubers that are either mounted on a dispenser or on a non-Manitowoc ice bin. For further questions, please reach out to our product consultants via email, live chat, or phone!