Hatco S-36 - Booster Water Heater, 36 KW, 16 Gallon Capacity

Need It Fast? Ships In Just 24 Hours!

Central Model#: 315-095 Brand: Hatco Mfg Part#: S-36
Your Cost:
$3,349.00 /Each

FREE SHIPPING

Make your selection to see the final price

Select options to see shipping information


Product Details

This electric Hatco S-36 is a booster water heater. This model has a 16 gallon capacity. This Hatco S-36, known as a water heater, has multiple "step loading" thermostats. This feature allows rated wattage to be applied in intervals reducing cost. This Hatco S-36 is 36 KW. This model raises water temperature to allow for a 180°F final rinse. This water heater, Hatco S-36 has a stainless steel front panel. This unit has a temperature/pressure relief valve, cast iron pressure reducing valve and two temperature gauges. This electric Hatco S-36 has a on/off switch. This model has 6" Black legs. This Hatco S-36 is 2358"Wx2234"Dx3138"H and weighs 214 lbs. This model is available in 208V or 240V (single phase) or 208V, 240V or 480V (three phase). Central Restaurant Products offers this Hatco S-36 with free shipping.

This Hatco S-36 has these main features:

  • 16 gallon capacity
  • 36 KW
  • 208V or 240V (single phase) or 208V, 240V or 480V (three phase)
  • 2358"Wx2234"Dx3138"H, 214 lbs.

CASTONE LINED TANK TEN YEAR LIMITED WARRANTY

Product ranks 9 out of 25 in Commercial Water Heaters.

prop65 warning

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer/birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Specifications

Central Model#: 315-095
Weight: 214 lbs.
Width: 2358"
Depth: 2234"
Height: 3138"
Capacity: 16 gallon
Phase: Single|Three
Type: Electric
Voltage: 208V|240V|480V
Watts: 36
Catalog Page: View on Catalog Page 192

Frequently Asked Questions

  • Is the heater insulated?

    • Yes! Each booster has fiberglass insulation to minimize heat loss.
  • My area has hard water. Will that be a problem for this unit?

    • Incoming water in excess of 3.0 grains of hardness per gallon must be treated and softened before being supplied to the booster heater. Water containing over 3.0 grains per gallon of hardness will decrease the efficiency and reduce the operating life of the unit. Note that product failure caused by liming or sediment buildup is not covered under warranty.
  • Reviews