Hatco C-6 3PH 6KW Booster Water Heater - 6 Gallon Capacity
Need It Fast? Ships In Just 24 Hours!
Electric Booster Water Heater creates 180°F final rinse water. 6 gallon capacity. Castone® cement lined tank. Stainless steel front panel. Temperature/pressure relief valve; cast iron pressure reducing valve; two temperature/pressure gauges. High temperature limit control. Pilot light; on/off switch. 6" Black legs. Slide brackets for mounting under dishtable available on 6 gallon capacity heaters only. Low water cut off to prevent element burnout. Dimensions include legs. Please check incoming water flow and temperature with your product consultant before ordering. 13"Wx203⁄4"Dx193⁄4"H. 6 KW. 118 lbs.
CASTONE LINED TANK TEN YEAR LIMITED WARRANTY
Product ranks 9 out of 25 in Commercial Water Heaters.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer/birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
|Catalog Page:||View on Catalog Page 192|
Frequently Asked Questions
Is the heater insulated?
- Yes! Each booster has fiberglass insulation to minimize heat loss.
My area has hard water. Will that be a problem for this unit?
- Incoming water in excess of 3.0 grains of hardness per gallon must be treated and softened before being supplied to the booster heater. Water containing over 3.0 grains per gallon of hardness will decrease the efficiency and reduce the operating life of the unit. Note that product failure caused by liming or sediment buildup is not covered under warranty.