Advance Tabco DI-3-1612 - 3 Compartment Drop-In Sink, 56"W
Keep dishes clean with the Advance Tabco DI-3-1612 Sink! The 3-compartment sink is made of 18 gauge type 304 series stainless steel construction with two faucets made of brass-nickel plated material. The drop-in style makes installation easy and the one piece seamless bowl design are durable for busy commercial kitchens. Large radii with a minimum dimension of 2" make cleaning a breeze and allows for increase capacity. Each bowl measures 16"W x 20" front-to-back x 12" deep with 1-1/2" IPS basket drain.Features Include:
- Drop-In Sink
- 16" wide x 20" front-to-back x 12" deep each/bowl
- 18 gauge 304 series stainless steel
- Two deck mounted 8" swing spout faucets
- basket drains
- 2" radii minimum
- Mounting clips provided accommodates all thicknesses of counter
This Product Ranks 25 Out Of 95 In Three Compartment Sinks.
|Bowl Size:||16" x 20"|
|Construction Material:||18 Gauge Stainless Steel|
Frequently Asked Questions
What is a three compartment sink used for?
- A three compartment sink is common in foodservice applications for complying with food safety regulations. Each bowl of the sink allows for a different function. The first bowl is for washing, using detergent and water that's at least 110 degrees Fahrenheit. The second bowl is for rinsing with plain hot water. The third bowl is for sanitizing, using 75 degree Fahrenheit water and the appropriate amount of food-grade sanitizing solution.
What's the difference between 300 series and 400 series stainless steel?
- 300 series stainless steel contains both chromium and nickel, and is not magnetic. 400 series stainless steel contains chromium but NO nickel, and is magnetic.
400 series products are not quite as corrosion-resistant as 300 series, and typically cost less. They are good for finishing surfaces.
300 series is corrosion-resistant, etch and crack resistant, and easy to clean and maintain. It is the most commonly used type of stainless steel.
How can I best take care of my stainless steel sink?
- Stainless steel must be cleaned regularly and properly to maintain its appearance and to protect against corrosion. Soft cloths, sponges, and scratchless pads work great. Be sure to clean with the "grain" of the stainless steel, not against it, and avoid rough or metal scratch pads that could scratch the surface and allow contaminants in. As for chemicals, Central Restaurant Products offers stainless steel cleaners and wipes. It's imperative that detergents containing chloride be avoided.
I thought stainless steel couldn't rust, but I see some rust on my sink. What's the deal with that, and what can I do about it?
- Stainless steel can't rust, per se. However, even with proper care, iron particles can contaminate the surface of your sink after time, and those particles can rust. You can gently rub a scratchless pad over the surface of the sink to remove the rust, as well as using cleaning pastes or "pickling" pastes.
Is stainless steel recyclable?
- Yes! All stainless steel products are 100% recyclable. The typical re-melt rate for stainless steel is up to 85%.